The SwissLas PM-3000B is a single color laser system with 450nm blue for a very high visibility.
The SwissLas Pure Micro Series sets new standards in terms of high power lasers in extremely small housings. The SwissLas PM-3000B is equipped with XScan60 scanner system and up to 35kpps @8° ILDA.
No matter if beam shows or professional advertising - the Pure Micro units work on highest professional level.
Like all Pure Micro systems, the PM-3000B has trim pots on the back side of the housing for x/y shift and they come with professional ILDA interface. The complete projector is built with Sealed Housing Technology and is cooled through the exterior cooling fins (bottom part).
The very small housing (18,6 x 16,5 x 12,5cm) and the very low weight makes this unit very versatile: Just carry several Pure Micro units in your hand luggage to your laser shows all over the world! Of course the Pure Micro units respect the very latest safety regulations according to IEC-60825 - and even beyond those: The XScan60 scanner system comes standard with Advanced Scan Fail Safety.
The projector has good beam specifications with a beam diameter of about 3,5mm and beam divergence of 1,0mrad (average). It has guaranteed output power of 2'700mW and a typical output power of 3'000mW.
|Total Power typical:||3'000mW|
|Guaranteed power at aperture:||2'700mW|
|Power Blue:||>2'700mW / 450nm|
|Beam Specifications:||ca. 3.5mm / 1.0mrad (average)|
|Operation Modes:||ILDA; optional DMX, LAN, SD-card|
|Scanner:||XScan60 scanner system, 45kpps@8°ILDA; as upgrade available CT-6210HP, >50kpps@8° ILDA|
|Scan Angle max.:||60° max.|
|Accessories:||External PSU, Allen key, power cable, manual|
|Power Supply:||External 24V DC>4A for 100-240V AC 50/60Hz|