The SwissLas PM-3600RGB Pure Diode lasers are completely equipped with diodes - even for the green color. These green 520nm diodes are seamlessly integrated in the SwissLas RGB array modules.
The results of this development are:
- a good divergence (1.0mrad, average)
- sharp beams and precise projections
- a brilliant green with great linear color fading behavior
- a high professional solution for laser applications that need highly accurate color balancing, but don't need too high powers.
The RGB module used for the Pure Micro projectors are Swiss Made and are manufactured with high precision. No matter if graphics projections, beam shows or professional advertising - the Pure Micro units work on highest professional level.
The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part).
The very small housing (18,5 x 16,5 x 12,5cm) and the very low weight makes this unit very versatile: Just carry several Pure Micro units in your hand luggage to your laser shows all around the world! Of course the Pure Micro units respect the very latest safety regulations according to IEC-60825 - and even beyond those: The fast 45kpps @8° ILDA XScan60 scanner system comes standard with Advanced Scan Fail Safety.
The projector has good beam specifications with a beam diameter of about 3.5mm and beam divergence of 1.0mrad (average). There is a guaranteed total power of 3'200mW and a typical output power of 3'800mW.
|Total Power typical:||3'800mW|
|Guaranteed power at aperture:||3'200mW|
|Power Red:||>600mW / 638nm|
|Power Green:||>1'000mW / 520nm|
|Power Blue:||>2'000mW / 450nm|
|Beam Specifications:||ca. 3.5mm / 1.0mrad (average)|
|Operation Modes:||ILDA; optional DMX, LAN, SD-card|
|Scanner:||XScan60 scanner system, 45kpps@8°ILDA; as upgrade available CT-6210HP, >50kpps@8° ILDA|
|Scan Angle max.:||60° max.|
|Accessories:||External PSU, Allen key, power cable, manual|
|Power Supply:||External 24V DC>4A for 100-240V AC 50/60Hz|
|Power Consumption:||90 W|